GODEX EZ2200P DRIVER

Remove the two screws in the front. Ribbon Tension Adjustment 2. To print the manual completely, please, download it. Close the top cover to complete the ribbon installation. Backlit graphics LCD display: Don’t show me this message again. Close the Top Cover to complete the cutter installation.

Uploader: Mozshura
Date Added: 7 February 2005
File Size: 20.62 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 95854
Price: Free* [*Free Regsitration Required]

Pressing the Pause key while printing, printer will pause the print job, when the Pause key is pressed one more time, the printer will continue with the rest of the print job. TPH print line adjustment 1 When printing stiff or thick paper, the print line needs to be moved forward paper feed direction in order to achieve better printing quality. Table Of Contents 1.

The USB device is built on the serial port, therefore make sure the interface setting is specified to goddex assigned port. Ribbon Tension Adjustment 2.

Flip the Label Feed Guide back down to its original position, and clip the guide in position.

Godex Print Head, 203 dpi for EZ-2200Plus/EZ-2250i,

Print Width maxmm. Power off the printer, press and hold the Pause key.

  IM3510 PRINTER DRIVER DOWNLOAD

Label length set by auto sensing or programming. At the same time they can be printed without computer. When printing, no ribbon is necessary; goded only requires direct thermal media. After the paper jam is cleared, power on the printer, and the cutter blade will go back to its original position. Open the Top Cover of the printer, and turn the printer sideways. The Self-Test function in a printer will help the user to troubleshoot whether the printer is operating normally.

Open the top cover. Use 3mm hexagon screwdriver to turn the cutter blade clockwise. Etiquette tape, continuous paper, fabric and polymeric carriers, cardboard, etc.

Don’t have an account? Install the Rewinder unit. Close the top cover to complete the ribbon installation.

Godex Print head dpi for Godex EZPLUS/ EZi

Communication Interface Paralle Interface Handshake: Wrap the ribbon around the Ribbon Shaft Rod and stick the ribbon onto the empty ribbon roll. Label gap and black mark sensing. Also See for EZ Programmer’s manual – 22 pages. Page of 34 Go.

  AVM FRITZ WLAN USB STICK N DRIVER

Godex Main Board

Self-test The Self-Test function in a printer will help the user to troubleshoot whether the printer is operating normally. Liner Rewind Sensor and the printer will stop printing until liner has been removed from the printer. When paper jams and cutter malfunctions, power off the printer.

Install the media into the printer refer to 2- godes for Ribbon Installation and for Label Installation. Face the printer front, and unscrew the Ez22000p Cover Screw. Table of Contents Add to my manuals Add. Printer Parts Please use the following diagrams to identify each printer part.

Remove the Rewinder Option Cover Plate. The strength and distribution of clamping pressure is adjusted by two stops.

Screw the Cutter Cover onto the cutter kit. Power on, Ribbon out, Media out; Control keys: